SMC Networks HRS Series - Temperature Waveform Screen

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-59
5.4.10 Temperature waveform screen
Press [ ] button on the menu to display “Temperature waveform” screen.
The “Temperature waveform” screen has following functions:
・ Displays “Circulating fluid temperature waveform”. The sampling cycles are 1
sec. each.
・ Displays “Circulating fluid temperature waveform”. The sampling cycles are 1
sec. each.
・ “Temperature waveform” can be displayed up to approximately last 9 hours.
Table 5.4-27 Temperature waveform screen
No.
Item
Function
Explanation
(1)
PV
Circulating fluid
temperature
Displays the current circulating fluid temperature.
SP
Set circulating fluid
temperature
Displays the set circulating fluid temperature.
(2)
Button
Time scroll
Press the button to shift the time axis to the past.
This can be displayed up to approximately the last 9
hours.
(3)
Button
Update of
temperature
waveform
Press “Time scroll” button to stop updating the
temperature waveform. Press this button to update the
temperature waveform.
 Collection of temperature data can continue even
while the update of temperature waveform is stopped,
by pressing “Time scroll” button.
(4)
Button
Time scroll
Press this button to shift the time axis forward.
(5)
Temperature
range
Change of
temperature range
A value can be entered to change the
temperature range for temperature waveform.
Press
Menu
Temperature waveform screen
(1)
(2)
(4)
(3)
(5)