SMC Networks HRS Series - Setting the Usage Time of DI Filter; Setting of the Usage Time of Dustproof Filter

DOC1001322
Chapter 5 Display and Setting of Various Functions
5.4 Description of the Screen HRS Series
5-26
・Setting the usage time of DI filter
1.
The replacement period (usage time) for a DI filter can be set.
“Maintenance reminderˮ is always issued when the filter reaches the specified time.
Touch the numeric section of DI filter to set the time of use.
Setting range: 1 to 9999 hours (by default: 500 hours)
・Setting of the usage time of dustproof filter
2.
The replacement period (usage time) for a dustproof filter can be set. “Maintenance
reminderˮ is always issued when the filter reaches the specified time. Touch the numeric
Check operation time screen
Enter the usage time
Touch
In the case of option D "With electrical conductivity control", it can be set.
Check operation time screen
Enter the usage time
Touch