SMC Networks HRS Series - Operating Condition Display; Pump Operating Condition Display

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-11
・Operating condition display
4. Indicates whether the product is running or has stopped running.
Display “TEMP READY status” and “PRESS LIMIT status”.
Display [ ] if the current temperature is within a certain range.
(Refer to “■ About TEMP READY function” (P.5-32) for “TEMP READY function”.) Display
[ ] if the circulating fluid discharge pressure has reached the pressure limit value.
(Refer to “■About control function of circulating fluid discharge pressure” (P.5-36) for
details of “PRESS LIMIT”.)
・Compressor operating condition display
5. Displays the run and stop status of the compressor.
・Pump operating condition display
6. Displays the run and stop status of the pump.
Run / stop status display
During
operation
Stopped
“Ready” / “P. Limit” display
ON/OFF compressor status display
Stopped
During operation
ON/OFF pump status display
Stopped
During operation
“TEMP READY” conditions
are met
The pump discharge
pressure is controlled