SMC Networks HRS Series - Page 138

DOC1001322
Chapter 7 Control, Inspection and Cleaning
7.4 Replacement of consumables HRL Series
7-10
3. Remove DI filter fixed band by pushing lever on the band.
(The temporary piping for DI filter is connected at the time of delivery. "Temporary piping for DI
filter" is used for long term storage of this product. Please keep it in a safe place.)
4. Pull out the DI filter to the front. The DI filter has been connected to the tube.
Please allow excessive force is not applied to the tube.
Press
Lever
Fixed band
Temporary piping
for DI filter
DI filter
DI filter IN
side tube
DI filter OUT side
tube