Technical Information
65
Guidance and Manufacturer’s Declaration — Electromagnetic Emissions
The pump is intended for use in the electromagnetic environment specied below. The customer or the user of the pump should assure that it is
used in such an environment.
Emissions Test Compliance Electromagnetic Environment — Guidance
RF emissions, CISPR 11 Group 1 The pump uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions, CISPR 11 Class B The pump is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic purposes.
Harmonic emissions, IEC 61000-3-2 Not applicable
Voltage uctuations/icker emissions, IEC 61000-3-3 Not applicable
Warning: Use of accessories other than those indicated or adjacent to other equipment may result in increased emissions or
decreased immunity of the pump. e user should verify normal operation of the pump in the conguration and environment
in which it is to be used.
To Next Page
Loading...
Need help?
General
