DDiiggiittaall PPeerrffoorrmmeerr TTeemmppllaattee
Duality SE emulates a Mackie Control Unit plus additional Mackie Control Expanders. The Control Surface setup
menu is located in the Digital Performer Setup menu:
Assign Duality SE’s MIDI ports so that the console faders map correctly to the DAW tracks with the Mackie Control
Unit as channels 1–8.
Duality SE’s Digital Performer Control Button Layout
The majority of functions are controlled via dedicated buttons with less reliance than the HUI interface on the 8x8
menu button matrix located beneath the TFT screen. When compared to the HUI front panel, the main changes are
as follows:
A different function grouping is used to assign parameters the channel D-pots. CHANNEL assigns Duality SE’s
channel gain element or DAW channel to the D-pot according to the state of the Console Focus button. The
encoder switch is used to ‘flip’ parameters onto the faders as before, but includes all processing parameters not just
send levels. The EDIT button is the standard MCU Edit (or Global View) command key, it does not affect operation
of the channel SEL buttons, which can be flipped between the Ready (RDY) and Select ( SEL) functions as with
the HUI mapping.
33--5555
DDAAWW CCoonnttrrooll
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
