TToottaall RReeccaallll
44--11
SSEECCTTIIOONN 44:: TTOOTTAALL RREECCAALLLL
OOvveerrvviieeww
The Multi-user Total Recall (TR) package is a chargeable option for the Duality SE console. If not supplied with your
console, please contact your nearest SSL representative for details.
The system uses the channel meter display screens in each bay to give a graphical display of current and stored
control settings for all rotary controls, faders and switches on Duality SE’s channel strips and centre section modules.
Controls that are in different positions from the stored values are highlighted in yellow, and may be reset manually
to the stored settings. Electronically latched switches such as EQ, Insert, Dynamics and Cut buttons, fader positions
and the Offline Trim controls can be reset to match the stored setup by pressing the fader status button (the
button to the left of the fader, closest to the top of the fader) twice. Pressing the SET ALL soft key twice will reset
all the soft button functions, fader positions and the Offline Trim controls. Pressing the SET SEL key twice will reset
the controls on all channels currently selected on the Central Routing Panel.
Selecting AScan (AutoScan) will scan the console for differences between the current and stored settings.
Each bay screen is used to display the settings for one channel (or the centre section), thus allowing multiple channels
to be reset at the same time.
TR setups are saved within Duality SE’s Projects system and stored locally in Duality SE’s flash memory. They can be
backed up aa part of a console Project - see section 6
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
