AAuuttoommaattiioonn
JJooiinn aanndd RReevviissee
At any time during Mix Review, the JOIN button can be used to switch all channels that were in Write at the last
rollback point, back into Write at the levels or state they were at the rollback point. This is useful, for example,
when balancing levels in a chorus. Once you have achieved the right balance, simply rollback before the start of the
chorus, go into Play, hit JOIN at the start of the chorus and the levels will drop into Write at the level set before
rollback.
The REVISE button has a similar action except that all channels in Write at the rollback point are returned to Write
at their current Mix position. This is useful when you are mixing a particular section, but have made a small mistake.
Just rollback before the mistake, hit REVISE and channels will immediately go into Write at the current fader level,
allowing you to overwrite the mistake.
Here is an exaggerated graphic representation of both functions:
Multiple rollback memories are supported so that successive operations of JOIN or REVISE can return different
sets of faders back to Write, if multiple rollbacks have taken place:
To return all faders to Absolute, use the JOIN or REVISE buttons until the ‘global’ rollback memory is reached,
at which point all faders will return to Write either at their current position (REVISE), or at the levels they had
at the global rollback point (JOIN).
55--1122 DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
