Solo BETA - Default Chapter; Table of Contents

SOLO BETA User Manual


Table of Contents
Power Specifications: 5
Control specifications: 5
Thermal Specifications: 6
Mechanical Specifications: 6
Mechanical Dimensions: 7
SOLO’s Interactional Sections: 8
Absolute Maximum Voltage Ratings: 9
Connectors and Sections: 10
Sections Description: 13
Section 1 - Motor Output 13
Section 2 - Supply Input 13
Section 3 - Analogue Inputs and +5V External Supply 13
“GND” PIN: 14
“+5V” PIN: 14
“DIR” PIN: 15
“P/F” PIN: 15
In Open Loop mode of 3 phase motors : 15
In Closed-Loop mode of DC, BLDC and PMSM motors: 15
In Closed-loop mode of AC Induction Motors: 16
“S/T” PIN in Closed_loop Mode: 17
In Torque mode: 17
In Speed mode: 18
“S/T” and “P/F” PINs in Open_loop Mode: 19
In case of using Analogue Voltages on “S/T”: 19
In case of using PWM inputs on “S/T”: 19
Three phase Motors “Power” Notation in Open-loop Mode: 19
Section 4 and 5_ Speed Controller Kp and Ki : 20
Kp Potentiometer : 20
Ki Potentiometer : 20
Section 6 _Piano Switch: 21


www.solomotorcontrollers.com
January 2021 - Revision V_1.0.5 Copyright © 2020, All right Reversed. SOLO motor controllers.

2