SOLO BETA User Manual
Notes:
- * The speed reference in Sensorless DC control here is not in RPM, but it’s a quantitative
value depending on the BEMF constant of your DC motor, you need to send different
values and find out the best numbers for you specific motor, in future we will publish more
information on how to exactly calculate the speed of your brushed DC motor using this
method. In General values from 0 to 500 for most of the motors are the range from 0 speed
to max speed.
- Using the command set in step 7, you can define any arbitrary speed for your motor to
reach and follow in real-time.
- The commands stored in Memory will be remembered after power recycle, and there is no
need to set them everytime.
www.solomotorcontrollers.com
January 2021 - Revision V_1.0.5 Copyright © 2020, All right Reversed. SOLO motor controllers.
65