Chapter: The Sonos® Controller 200
7-13
Sort folders by
You can set the sorting preference for music folders that are accessible from your
music library. You can choose to sort by:
•Track name
• Track number
•Filename
See "Sort folders by preference" on page 4-16 for more information.
Line-In encoding
When you have line-in music sources attached to a ZonePlayer, line-in encoding
determines how the Sonos Multi-Room Music System will encode the data coming
in from these sources. For multi-room audio, we recommend the Compressed
setting. For the highest quality sound, you can select Uncompressed encoding
instead (note that this selection requires more network bandwidth than compressed
audio.) For TV or DVD audio, we recommend the Uncompressed setting.
1. From the Music Menu, touch Settings
.
2. Touch Advanced Settings>Line-In Encoding.
3. Select Uncompressed or Compressed encoding.
Selecting a different wireless channel
The Sonos Multi-Room Music System selects the optimal radio frequency channel
during setup. However, if you have other wireless devices using this channel, you
may want to switch the Sonos Multi-Room Music System to another channel to
avoid conflicts, as conflicts may cause audio drop-outs.
1. From the Music Menu, touch Settings.
2. Select Advanced Settings>Wireless Channel.
3. Select a different wireless channel.
It may take several seconds for the switch to take effect. If you have music playing, a
short music dropout will occur during the wireless channel change.
To Next Page
Loading...
