Sonos Multi-Room Music System User Guide
2-20
Using the Sonos Controller 200
1. From the Music Menu, touch Settings>ZonePlayer Settings. (If you wish to
turn off a ZoneBridge status indicator light, select ZoneBridge Settings instead.)
2. Touch to select the zone you wish to affect.
3. Touch White Status Indicator Light—off means the white light on the front of
the unit does not display during normal operation.
Changing a ZonePlayer’s Operating
Mode
It’s possible to use a ZonePlayer simply to extend the wireless range of your Sonos
Multi-Room Music System and not to play music, by placing the ZonePlayer into
Sonos Extender mode. A ZonePlayer operating in Sonos Extender mode is
sometimes referred to as a hidden ZonePlayer, and will not appear in your Zones
menu.
The ZonePlayer must already be part of your Sonos Multi-Room Music System in
order to change its mode of operation.
(You may wish to purchase a ZoneBridge to extend your Sonos system’s wireless
range instead.)
Using the Sonos Controller for Mac or PC
1. From the Zones menu, select ZonePlayer Settings.
2. Highlight the ZonePlayer you want to change, and click Settings.
3. Select the Advanced tab.
4. Select either Normal Mode or Sonos Extender Mode, and click OK.
Using the Sonos Controller 200
1. From the Music Menu, select Settings>ZonePlayer Settings.
2. Touch to select the ZonePlayer you want to change.
3. Select ZonePlayer Mode, then select either Normal or Extender mode.
To Next Page
Loading...
