Chapter 2: System Setup
2-23
Turning Off Music System
Your Sonos Multi-Room Music System is designed to be always on; the system uses
minimal electricity whenever it is not playing music. To quickly stop streaming music
in all zones, you can use the Pause All feature.
• Using a handheld Sonos Controller, select Pause All from the Zone menu.
• Using the Sonos Controller for Mac or PC, select Pause All from the Play
menu.
Your ZonePlayers will remain off until you press Play to restart each zone or zone
group.
Using Line-out
You can easily connect your home theater, stereo, or powered speakers to a
ZonePlayer. Depending on your ZonePlayer model, you can use analog or digital
audio outputs to connect to an external amplifier. The ZonePlayer 90 has both digital
and analog outputs, while the ZonePlayer 100 has analog outputs. The ZonePlayer
120 is not designed with audio outputs.
For additional information on connecting audio devices, you can go to our Web site at
http://faq.sonos.com/cables.
To connect to a home theater
1. Choose one of the following options:
• If you have digital inputs on your home theater receiver and your ZonePlayer
supports digital audio output, you can use either a TOSLINK® optical audio
cable or a digital coaxial cable to connect the ZonePlayer's digital output to the
digital input on your home theater receiver.
• If you have analog inputs on your receiver, use a standard RCA audio cable to
connect a ZonePlayer's analog audio output to the audio inputs on your home
theater receiver.
2. Select the proper input channel on your home theater system.
3. If you are setting up a new ZonePlayer that has audio outputs, plug in your
ZonePlayer, and then choose one of the following options:
To Next Page
Loading...
