Sonos Multi-Room Music System User Guide
2-24
• Use the Sonos Controller for Mac or PC to add the ZonePlayer to your Sonos
system by selecting Add a ZonePlayer or ZoneBridge from the Zones menu.
• Use a handheld Sonos Controller to add the ZonePlayer to your Sonos system
by selecting Settings>Add a Zone from the Music Menu.
To control the volume from home theater
Set the line-out level on this ZonePlayer to Fixed by selecting one of the following
options:
• Using the Sonos Controller for Mac or PC, select ZonePlayer Settings from
the Zones menu. Select the ZonePlayer attached to your home theater, and
then click Settings. Click the Line-Out tab, and choose Fixed.
• Using the Sonos Controller 200, select Settings>ZonePlayer Settings from
the Music Menu. Touch to select the ZonePlayer attached to your home the-
ater, select Line-Out Level, and choose Fixed.
To control the volume from Sonos system
1. Adjust your home theater or other audio device's volume to typical listening
volume.
2. Set the line-out level on this ZonePlayer to Variable by selecting one of the
following options:
• Using the Sonos Controller for Mac or PC, select ZonePlayer Settings from
the Zones menu. Select the ZonePlayer attached to your home theater, and
then click Settings. Click the Line-Out tab, and choose Variable.
• Using the Sonos Controller 200, select Settings>ZonePlayer Settings from
the Music Menu. Touch to select the ZonePlayer attached to your home the-
ater, select Line-Out Level, and choose Variable.
3. Use a Sonos Controller to adjust the volume on your Sonos system so you can
hear music. This may be at the high end of the volume scale.
4. If desired, you can readjust the volume on your home theater system so that the
volume range for the Controller falls within your typical listening range.
Note: When you change the line-out level to Fixed on your ZonePlayer, you
will not be able to adjust the volume or the equalization settings using your
Sonos Controller.
To Next Page
Loading...
