Sonos Multi-Room Music System User Guide
C-2
System Setup Using Sonos Controller
200
Step 1: Connect one Sonos component to your router
Connect one ZonePlayer or ZoneBridge to your router using a standard Ethernet
cable (included), and then apply power.
• If you have structured (built-in) wiring that connects to a router located else-
where in your home, you can connect the Ethernet cable from a live wall plate
into one of the Ethernet switch connectors on the back of your Sonos compo-
nent.)
Step 2: Place any other ZonePlayers or ZoneBridges in the rooms of
your choice
• Choose one of the following options:
• If you are adding a ZonePlayer 120, attach speakers to your ZonePlayer
(see "If you are connecting a ZonePlayer 120" on page 2-8).
• If you are adding a ZonePlayer 90, connect to an external amplified device
(see "Using Line-out" on page 2-24).
• If you are connecting a ZoneBridge, simply apply power.
Step 3: Set up your Sonos system using the Sonos Controller 200
1. If your Sonos Controller 200 is new, place it momentarily into the charging
cradle to wake it up.
2. Touch to select your language preference.
3. From the Welcome screen, touch Next.
4. Follow the Controller’s on-screen prompts to connect your ZonePlayer or
ZoneBridge.
To Next Page
Loading...
