Sonos Multi-Room Music System User Guide
2-34
Ethernet switch connectors (2) Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
AC power (mains) input
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to power
outlet.
Analog audio in Use a standard RCA audio cable to connect the audio
outputs from a separate audio component such as a
CD player, to the ZonePlayer’s analog audio inputs.
Analog audio out
(fixed/variable)
Use a standard RCA audio cable to connect the
ZonePlayer’s analog audio outputs to the audio inputs
on a separate audio component, such as an amplifier
or your home theater receiver.
TOSLINK® digital audio out You can use a TOSLINK optical audio cable to connect
the ZonePlayer’s TOSLINK digital audio output to the
audio inputs on a separate audio component, such as
an amplifier or your home theater receiver.
Coaxial digital audio out You can use a digital coaxial cable to connect the
ZonePlayer’s coaxial digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
To Next Page
Loading...
