128 Chapter 5: DICOM Connectivity
DICOM
To perform an automatic worklist update:
1 Ensure TITAN system is turned on and connected to the LAN. See “To connect to a LAN:” on
page 105.
2 Ensure TITAN system is set up for an automatic worklist query. See “To set up an automatic
query update:” on page 118.
The worklist is automatically updated.
3 Verify the current system date and time.
To sort a worklist:
1 Press the Patient key.
2 Select Worklist from the on-screen menu.
3 Select the desired column heading (Name, ID, Accession, Procedure, or Date).
The worklist is sorted in ascending order.
To Next Page
Loading...
