Chapter 2: Getting Started 31
Getting Started
To set Date and Time:
Figure 13 Setup Screen: Date and Time
Warning: An accurate date and time are critical for accurate obstetrics calculations. Verify
that the date and time are accurate before each use of the system. The system does
not automatically adjust for daylight savings time changes.
Date
1 Press the Setup key.
2 Select Date and Time.
3 In the Date field, enter the current date (year, month, and day).
Time
1 Press the Setup key.
2 Select Date and Time.
3 In the Time field, enter the current time in 24 hour format (hours
and minutes).
Reset
To return settings for this setup page to factory default, select Reset
from the on-screen menu.
To Next Page
Loading...
