30 Chapter 2: Getting Started
Getting Started
Ethernet Connectivity
1 Press the Setup key.
2 Select Connectivity.
3 In the Transfer Mode list, select SiteLink.
After changing connectivity, a dialog box is displayed to restart
the system.
Ethernet Setup
1 Press the Setup key.
2 Select Connectivity.
3 Select Ethernet Setup.
4 Enter information in the following fields: (see DICOM chapter
for definition of terms)
• Host Name
• IP Address
• Subnet Mask
• Default Gateway
• Alternate Gateway
5 In the Network Speed list, select from the list.
6 Select Save.
Reset
To return settings for this setup page to factory default, select Reset
from the on-screen menu.
To Next Page
Loading...
