•Using me Zoom Feature
Zooming is a recording technique that lets you change the size of the subje_in the scene.
For more professional-looking recordings, use the zoom sparingly.
"T" side: for telephoto (subject appears closer)
"W" side: for wide-angle (subject appears farther away)
Zooming Speed (Dual speed zooming)
Press the power zoom button firmly for a high-speed zoom; press it softly for a relatively slow zoom.
When you shoot a subject using a telephoto zoom
If you cannot get a sharp focus while in extreme telephoto zoom, press the "W" side of the power
zoom button until the focus is sharp. You can shoot a subject that is at least 3.3 feet (about 1 m) away
from the lens surface in the telephoto position, or about 1/2 inches (about 1 cm) in the wide-angle
position.
Notes on Digital Zoom (CCD-TRV40 only)
• More than 12x zoom is performed digitally, and the picture quality deteriorates as you go toward
the T side. If you do not want to use the digital zoom, set the D ZOOM function to OFF in the menu
system. (p.33)
• The horizontal bar in the power zoom indicator separates the digital zooming zone (above the bar
[a]) and the optical zooming zone (under the bar [b]). If you set the D ZOOM function to OFF, the
part above the bar disappears.
:1
_0
t't
o
5"
T
W
13
To Next Page
Loading...
