The EDITSEARCH function is used to view the recorded picture for a moment during recording.
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture on the LCD
screen. You can also review the picture in the viewfinder.
(1) While pressing the small green button on the POWER switch, turn it to CAMERA.
(2) Turn STANDBY up.
(3) Press the - (t_) side of EDITSEARCH momentarily; the last few seconds of the recorded portion
plays back. You can also monitor the sound. (Re(: Review)
Hold down the - side of EDITSEARCH until the camcorder goes back to the scene you want. The
last recorded portion is played back. To go forward, hold down the + side. (l:ditSearch)
_: You can hear the beep sound to confirm your operation.
To Stop Playback
Release EDITSEARCH.
To Begin Re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH. Provided you do
not eject the cassette, the transition between the last scene you recorded and the next scene you record
will be smooth.
18
To Next Page
Loading...
