You can go to the end of the recorded portion. Press END SEARCH after you record and play back the
tape. The tape starts rewinding or fast-forwarding and the last 3 seconds of the recorded position plays
back. Then the tape stops at the end of the recorded picture (End Search).
It is convenient when you restart recording after you played back the recorded portion.
(1) While pressing PUSH OPEN, open the LCD panel.
(2) Press END SEARCH.
This function works when the POWER switch is set to either CAMERA or VTR.
End Search function does not work once you eject the cassette after you recorded in the tape.
1
2
END SEARCH
22
To Next Page
Loading...
