You can enjoy pictures with little noise on the LCD screen during still, slcf_ and picture search.
(CRYSTAL-CLEAR still/slow/picture search)
To View a Still Picture (Playback pause)
Press II during playback. To resume playback, press U or 12>.
To Locate a Scene (Picture search)
Keep press _ or _ during playback. To resume normal playback, release the button.
To Monitor the High-speed Picture while Advancing the Tape or Rewinding
(Skip scan)
Keep pressing _ while rewinding or _ while advancing the tape. To resume normal playback,
press [_.
To View the Picture in a Sequence of Stop-motion Images
Press EDITSEARCH in Playback pause mode. If you keep pressing EDITSEARCH, you can view the
picture play back in the forward (+) or reverse (-) direction.
To View the Picture at 115 Speed (Slow playback) (only with the Remote
Commander)
Press I"" on the Remote Commander during playback. To resume normal playback, press liD".If slow
playback lasts for about 1 minute, it shifts to normal speed automatically.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When Playback pause mode lasts for 5 minutes, the camcorder automatically enters stop mode.
m_
'5_.
-i
al
at
.-4
"O
®
21
To Next Page
Loading...
