You can record a tape from another VCR or a TV program from a TV that has video/audio outputs.
Connect the camcorder to the TV or VCR.
Turn down the volume of the camcorder while editing. Otherwise, the picture distortion may occur.
(1) Set the POWER switch to VTR.
(2) Press REC • and the button on the right together at the point where you want to start recording.
1 2
REC
AUDIO
VIDEO OUT
.,,,L._,
AUDIO OUT
r--'-t"N : Signal flow
To Stop Recording
Press D.
Monitoring the Picture from a TV or VCR
You can monitor the picture on the LCD screen or in the viewfinder. Connect the camcorder to the
outputs on the TV or VCR.
36
To Next Page
Loading...
