83
Special Operations
Forcibly Entering Single
Editing Mode
State: Editor mode
Method: Press RECORDER (DEVICE 1) + ALL STOP
buttons
Display: “SGL_EDIT” display in the PLAYER timecode
display area
Operations: –
Exit: Press RECORDER (DEVICE 1) or PLAYER
(DEVICE 2) button
See page 63 for details.
Performing DMC Editing
State: Editor mode
Method: Press PLAYER (DEVICE 2) + ALL STOP
buttons
Display: ALL STOP button flashes. “DMC ***” display
in the PLAYER timecode display area.
Operation: Configure the initial speed using the outer ring
of the search dial while pressing the ALL STOP
button. Press the PREVIEW button to start recording
in DMC speed.
Exit: Press PLAYER (DEVICE 2) + ALL STOP buttons
See page 64 for details.
Controlling Two VTRs
Simultaneously (Parallel
Running Mode)
State: Setup menu item 20 RMT PARA is set to ON in
remote control mode
Method: Press RECORDER (DEVICE 1) + PLAYER
(DEVICE 2) buttons
Display: Pressed buttons light and flash
Operations: –
Exit: Press RECORDER (DEVICE 1) or PLAYER
(DEVICE 2) button
Using the Ten-Key Input
Function
State:
• Editor mode
• Setup menu item 19 is set to NORMAL or XDCAM in
remote control mode
Method:
• In editor mode: RECORDER (DEVICE 1)/PLAYER
(DEVICE 2) button + edit point button
• When menu item 19 is set to NORMAL in remote
control mode: PF9
• When menu item 19 is set to XDCAM in remote control
mode: RECORDER (DEVICE 1)/PLAYER (DEVICE
2) button + PREVIEW button
Display: PREVIEW and PF1 to PF9 buttons light
Operations:
• PREVIEW and PF1 to PF9 buttons: Numeric value entry
• PF11: Cue up
• PF12: Numeric value clearing
• PF13: Input method switching
• PF14: Single-character delete
Exit: PF15
See page 70 for details.
Special
Operations
To Next Page
Loading...
