Sony RM-280 - Preparations; Preparing Power Sources; Connecting the VTR or XDCAM; Using the AC Adaptor

55
Preparations
Preparing Power Sources
This unit operates on DC power. Supply power to this unit
in one of the following ways.
Connecting the VTR or XDCAM
When this unit is connected to the HDW-S280 HDCAM
recorder or PDW-HD1500 XDCAM recorder with a 9P-4P
remote control cable, the power is supplied to this unit
from the connected device.
Using the AC Adaptor
With the AC adaptor (supplied), the power is supplied to
this unit from an AC outlet.
Install such that no load is placed on the DC adapter cable
connectors or the DC adapter cable itself.
Preparations
Note