54
Locations and Functions of Parts
e REC TALLY OUTPUT connector (BNC-type)
Outputs the tally signal when the device connected to the
RECORDER (DEVICE 1) connector of this unit is
recording.
f REF IN/OUT (reference video signal input/output)
connector (BNC-type)
Inputs or outputs a reference video signal. This connector can
be used as an input connector or an output connector
depending on the setting of setup menu item 17
(see page 76)
.
When the system frequency is set to 29.97 or 25 frames,
the REF IN/OUT connector cannot be used as an output
connector.
Note
To Next Page
Loading...
