Sony RM-280 - Items in the Setup Menu

75
Setup Menu
Items in the Setup Menu
In the “Settings” column of the table, the factory setting is indicated by enclosing parenthesis.
Item
number
Item name Settings
01 PREROLL
(PREROLL TIME)
Sets the preroll time.
3s, [5s], 7s, 10s, 15s, 30s
02 CNT RST
(COUNTER AUTO RESET)
Sets whether to reset the time counter when the first edit point is
entered, when the time data in the display window is set to RTC or
CTL.
[OFF]: Doesn’t reset automatically.
AUTO RST: Resets automatically.
03 AUTO ENT
(AUTOMATIC IN ENTRY AFTER AUTO
EDIT)
Sets whether to automatically enter the OUT point being edited as
the IN point of the next edit after the automatic editing.
[OFF]: Doesn’t enter the IN point automatically.
REC ENT: Enters the IN point for the tape of the recorder
automatically.
R/P ENT: Enters the IN point for the tapes of both the recorder and
the player automatically.
04 CTL RNGE
(CTL/RTC RANGE)
Sets the display range of time data when the TC/RTC/CTL switch is
set to RTC or CTL.
[+ –12H]: ± 12-hour clock
24H: 24-hour clock
05 SYNC SEL
(SYNCHRO SELECT)
Sets whether to adjust the tape speed of the player and the recorder
and to synchronize them.
[ON]: Synchronizes.
OFF: Doesn’t synchronize.
06 SYNC VTR
(SYNCHRO VTR)
Sets whether tape speed of the recorder or the player will be
controlled when synchronizing.
[RECORDER], PLAYER
07 SYNC ERR
(SYNCHRO ERROR)
Sets whether to abort the editing if the unit cannot synchronize the
tape speed of the player and the recorder to an accuracy of ± 0
frame, when setup menu item 05 SYNC SEL is set to other than
OFF.
[ABORT]: Aborts the editing.
EDIT: Keeps on the editing.
Note
An editing may be aborted even if this setting is set to EDIT.
08 SVLCK ER
(SERVO LOCK ERROR)
Sets whether to abort the editing when the servo-mechanism of the
VTRs doesn’t lock.
[ABORT]: Aborts the editing.
EDIT: Keeps on the editing.
09 EDIT DLY
(EDIT DELAY)
Sets by frame the edit delay time (the time from when this unit sends
the recording command until the time the recorder starts recording)
of the recorder.
[AUTO]: Sets to the preset value depending on the VTR.
–1 to –24: Set manually.
Note
When you set the edit delay time manually, perform a trial editing,
and confirm the value to prevent editing errors.
10 R ST DLY
(RECORDER START DELAY)
Sets whether to set the start delay time of the recorder to the preset
value or the value learned by the LEARN function.
[AUTO]: Sets to the preset value.
LEARN: Sets to the learned value.
11 P ST DLY
(PLAYER START DELAY)
Sets whether to set the start delay time of the player to the preset
value or the value learned by the LEARN function.
[AUTO]: Sets to the preset value.
LEARN: Sets to the learned value.