Need help?Do you have a question about the Sony SLV-686HF and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | SLV-686HF |
| Type | VCR |
| Video Format | VHS |
| Recording Speed | SP, LP, EP |
| Playback Speed | SP, LP, EP |
| Number of Heads | 4 |
| Hi-Fi Stereo | Yes |
| Tuner | Yes |
| Remote Control | Yes |
| Inputs | Composite |
| Outputs | Composite, RF |
| Connections | RF |
Section to record VCR model and serial numbers for service reference.
Important safety guidelines for operating the VCR to prevent hazards.
Recommendations for proper installation to ensure ventilation and prevent damage.
Guidance on navigating and understanding the VCR instruction manual.
Procedure to identify your TV's connection types before proceeding.
Step-by-step guide for connecting a VHF/UHF antenna to the VCR.
Instructions for connecting a VHF-only antenna to the VCR.
Guide for connecting a UHF-only antenna to the VCR.
Instructions for connecting both VHF and UHF antennas to the VCR.
Steps to connect the VCR to a cable TV system.
Guide for connecting the VCR to a TV with audio/video input jacks.
Instructions for attaching the supplied external antenna connector.
Configuration of the RF unit for proper TV signal reception.
Guide for correctly inserting batteries into the remote commander.
Procedure for setting the command mode for VCR operation.
How to automatically preset all available TV channels.
Explanation of the fine-tuning indicator and its readings.
Instructions for inserting a video cassette into the VCR.
How to use the safety tab to prevent accidental recording.
How to stop, pause, and resume tape playback.
Using DUAL MODE SHUTTLE for fast forward and rewind.
Accessing and understanding the VCR's data screen display.
Marking and finding specific points on a tape for easy access.
Tips for playing tapes recorded on different VCR models.
How to manually adjust tape tracking for clearer playback.
Choosing audio output for stereo or bilingual tapes.
How to pause and resume recording at specific points.
Instructions for recording a program while the TV is off.
Procedure for programming timed recordings for future broadcasts.
How to modify or cancel previously set timer recordings.
Setting up recurring daily or weekly recording schedules.
Searching for scenes at high speed during playback.
Scanning ahead 30 seconds at high speed during playback.
Adjusting playback speed for slow motion viewing.
Advancing or reversing picture one frame at a time.
Adjusting picture quality in variable speed playback modes.
Marking specific points on tape for easy program location.
How index signals are automatically or manually marked.
Using index signals to locate and play specific programs.
Searching for programs based on index signal proximity.
Setting and adjusting the recording duration for quick timer.
List of remote buttons functional during quick timer recording.
Essential settings and checks before starting video editing.
Identification and location of controls on the VCR's front panel.
Identification of remote commander buttons (1-15).
Identification of remote commander buttons (16-27).
Solutions for power switch and operation problems.
Troubleshooting clock stop and timer setting errors.
Resolving problems with TV program display and signal.
Fixes for streaks, no picture, or unclear playback.
Addressing vertical picture movement and sound drop-out.
Resolving stereo recording, timer setting, and indicator issues.
Troubleshooting data screen display and commander operation.
Details on VCR format, video signal, and tape speeds.
Information on timer settings, power requirements, and backup.
Details on VCR's audio and video input/output connections.
Specifications for the remote commander and supplied accessories.
To Next Page
