Command Descriptions
3-28
VX4792 User Manual
!( "$3()/1- ,/&+ $2$
!(
!(
0$&(
"$3()/1- ,/&+ $2$
,/&+ $2$1%*21$14 $2$
where $1%*21$14 '$2$ is the unscaled waveform data in binary format. The
data consists of the lower 12 bits of each two bytes. The value is expressed as a
signed binary with offset 0x0800
16
. So 0x0800
16
equals zero level, 0x0FFF
16
equals positive maximum level, and 0x0000
16
equals negative maximum level.
!
transmits an unscaled waveform to the waveform generator. The block data
element #3256 indicates that 256 bytes of binary data are to be transmitted.
DATA?
The query returns all settings related to the data command currently in
effect for waveform or marker transfer.
WAVEFORM
*.$2*/., , &(
None
The response is returned in a continuous format (see Examples below)
might return "!" #
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Returns
Examples
To Next Page
Loading...
