VX4792 User Manual
ix
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
Injury Precautions
To avoid fire hazard, use only the power cord specified for the mainframe.
To avoid electric shock or fire hazard, do not apply a voltage to a terminal that is
outside the range specified for the mainframe.
This product is grounded through the grounding conductor of the power cord of
the mainframe. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
To avoid electric shock or fire hazard, do not operate this product with covers or
panels removed.
To avoid fire hazard, use only the fuse type and rating specified for this product.
To avoid electric shock, do not operate this product in wet or damp conditions.
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Product Damage Precautions
Do not operate this product from a power source that applies more than the
voltage specified.
Before applying power to the mainframe, ensure that the line selector is in the
proper position for the power source being used.
Use Proper Power Cord
Avoid Electric Overload
Ground the Product
Do Not Operate Without
Covers
Use Proper Fuse
Do Not Operate in
Wet/Damp Conditions
Do Not Operate in
Explosive Atmosphere
Use Proper Power Source
Use Proper Voltage
Setting
To Next Page
Loading...
