Sony Tektronix VX4792 - Status and Event Reporting; Status and Events

Command Descriptions
VX4792 User Manual
3-27
*CLS
The  common command clears the SESR (Standard Event Status Register),
the SBR (Status Byte Register), and the Event Queue, which are used in the
waveform generator status and event reporting system. For more details, refer to
Status and Events.
STATUS and EVENT
, , , ,  , !", , 



clears the SESR, the SBR, and the Event Queue.
CURVe (?)
The  command transmits unscaled, binary-formatted waveform data from
an external controller to the location inside the waveform generator specified
with the ! command.
The  query transmits unscaled data for a waveform in binary format to the
external controller from the source located inside the waveform generator
specified with the  command.
Each waveform transmitted should have an associated waveform preamble that
contains information such as data format, scale, and other information that the
waveform generator uses to construct a scaled waveform from the waveform
data.
WAVEFORM
, , , !, 
Group
Related Commands
Syntax
Examples
Group
Related Commands