Command Descriptions
VX4792 User Manual
3-31
DESE (?)
The command sets the bits of the DESER (Device Event Status Enable
Register) used in the status and event reporting system of the waveform
generator. The query returns the contents of the DESER. Refer to Status
and Events for more information about .
The power-on default for the DESER sets all bits to 1 if the power-on status flag
is TRUE. If this flag is set to FALSE, the DESER maintains the current value
through a power cycle.
STATUS and EVENT
, , , , , !, ,
where is a decimal integer within the range from 0 to 255, that sets the
DESER bits to the binary equivalent.
sets the DESER to 177 (binary 10110001), which sets the PON, CME, EXE and
OPC bits.
might return , which indicates that the DESER contains the binary
number 10110000.
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
