Command Descriptions
VX4792 User Manual
3-41
FILTer (?)
The % command selects one of four low pass filters, or no filter. The
% query returns the name of the currently selected filter.
SETUP
&', &, & #", #%!
% ( ' ) ) ) ) *
%
%
$
'
' OFF (no filter is used)
1 MHz
5 MHz
20 MHz
50 MHz
selects a low-pass filter that rolls off frequencies above a 20 MHz cut off
frequency.
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
