Sony Tektronix VX4792 - Page 147

Command Descriptions
3-64
VX4792 User Manual
OUTPut:SYNC (?)
The  command selects a point on the waveform at which the sync
signal is generated and output at the SYNC connector on the front panel. The
 query returns the currently selected position.
OUTPUT
None
     








 — generates a sync signal when a waveform is triggered
 — generates a sync signal at the end of a waveform
 
sets the sync signal to output at the end of a waveform.
*RST
The  common command resets the waveform generator to the default state
(default values are listed in Appendix C).
SYSTEM
None


None

resets the instrument.
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples