Sony Tektronix VX4792 - Page 156

Command Descriptions
VX4792 User Manual
3-73
STOP
The  command terminates waveform output. When the mode is not set to
continuous, it also resets the sequence pointer to output the waveform from the
top of the sequence with next trigger event.
MODE
, , 


None

stops the output of a waveform.
*TRG
The  common command generates a trigger event. This command is
equivalent to the  command.
MODE
, , 


None

generates a trigger event.
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples