Command Descriptions
VX4792 User Manual
3-79
*TST?
The common query performs the self-test and returns the results. If an
error is detected during self-test, execution is immediately stopped.
. The waveform generator does not respond to any commands or queries
issued during the self-test. The self-test takes up to 90 seconds to complete.
CALIBRATION and DIAGNOSTIC
, ,
None
where and is one of following arguments.
terminated without error
detected an error in the CPU unit
detected an error in the setup-related unit
700 detected an error in the waveform memory
might return 100 to indicate that errors were detected in the CPU unit.
Group
Related Commands
Syntax
Arguments
Returns
Examples
To Next Page
Loading...
