Sony Tektronix VX4792 - Page 166

Command Descriptions
VX4792 User Manual
3-83
WFMPre?
The WFMPre? query returns all settings for the waveform preamble.
WAVEFORM
All WFMPRE sub-group commands, DATA:SOURce
WFMPre?
WFMPre ?
None
Returns the settings as a sequence of commands, suitable for sending as set
commands to restore a setup (see Examples below)
:WFMPRE? might return as follows:
:WFMPRE:ENCDG BIN;BN_FMT RP;BYT_NR 2;BIT_NR 12;BYT_OR MSB;CRVCHK
NONE;WFID "WAVEFORM.WFM, 1000 points, clock: 100.0MHz, amplitude:
1.000V, offset: 0.000V";NR_PT 1000;PT_FMT Y;XUNIT "S"; XINCR
1.0000E-08;PT_OFF 0;XZERO 0.000;YUNIT "V";YMULT 2.442E-04; YZERO
0.000;YOFF 2.047E+03
WFMPre:BIT_NR (?)
The WFMPre:BIT_NR command specifies the number of bits of precision for each
binary data point. The WFMPre:BIT_NR? query returns the bits of precision
currently specified.
WAVEFORM
WFMPre:BN_FMT, WFMPre:BYT_NR, WFMPre:PT_FMT, WFMPre:BYT_OR,
WFMPre:ENCDG, DATA:ENCDG
Group
Related Commands
Syntax
Arguments
Returns
Examples
Group
Related Commands