SPECS HSA3500 - Modedef Sections

An example for a [Macro] section is:
[[Macro] AnalyzerVoltages
{
[DacVoltage] MacroGroundPlate
{
DacId = 11.1
MaxStep = 45.0
OperationMode = 2
Formula = 0
}
...
}
3.2.10.8 ModeDef Sections
The configuration file must contain a [ModeDef] section for each HSA3500 mode
(this is typically a lens mode in a special voltage range). This section contains all in-
formation required by the software to activate and operate a HSA3500 mode. The
most essential data are the calculation formulas for all DAC voltages used in a mode,
as described in the [DacVoltage] subsections. All these sections and subsections can
be declared by inheritance.
HSA3500 / HSA3500 plus Power Supply 37