Need help?Do you have a question about the Standard Imaging QA BEAMCHECKER PLUS and is the answer not in the manual?
General| Software | QA Beamchecker Plus Software |
|---|---|
| Interface | USB |
| Power | USB powered |
| Angular Range | 0° - 360° |
| Field Size Range | Up to 40 x 40 cm |
| Power Supply | USB |
Explains the initial setup and daily use of the QA BeamChecker Plus.
Lists the items packaged with the QA BeamChecker Plus and initial setup steps.
Details the process of installing software and creating a database.
Explains how to acquire a baseline for energy or plan comparison.
Guides through taking routine measurements using Wire-Free mode.
Details how to view, download, and analyze acquired measurement data.
Details the function of buttons, LEDs, and the display on the front panel.
Explains the functionality and connection of the Power/Data Cradle.
Lists the necessary hardware and OS specifications for the software.
Outlines the process of creating a new database file for the software.
Describes how to add and manage treatment rooms within the database.
Explains the purpose and importance of baselines for routine measurements.
Guides on physically setting up the QA BeamChecker Plus for measurements.
Details the steps for preparing the software for baseline acquisition.
Explains how to recreate an existing baseline for a specific energy or plan.
Describes how to delete erroneous or unneeded baselines from the database.
Introduces routine QA measurements and the two available modes.
Provides step-by-step instructions for performing measurements using Wire-Free mode.
Explains how to perform measurements with high dose rates.
Describes fault codes and troubleshooting steps for Wire-Free mode.
Guides users through performing measurements using the Real-Time Operation mode.
Details the process for downloading acquired data from Wire-Free mode.
Explains how to selectively view measurement data by energy or plan.
Describes how to print reports and export measurement data.
Guides on setting up the device and software for Physics Mode measurements.
Details the steps for performing measurements and collecting data in Physics Mode.
Defines synchronization and the master/slave relationship between device and database.
Addresses issues when the device and database are not synchronized and how to resolve them.
Details the setup and use of the Bluetooth Adapter Kit for wireless communication.
Explains how to install and use the Gantry Mount Accessory for gantry angle measurements.
Describes the Precision TomoTherapy Leveling Platform and its use in laser positioning tests.
Details temperature and pressure correction algorithms used across all modes.
Defines algorithms for flatness, axial, and transverse symmetry in Static 5 Channel mode.
Defines algorithms for energy and lateral profile measurements in TomoTherapy mode.
Introduces the process of creating QA plans for rotational delivery systems.
Explains how to acquire and use a CT reference image for planning.
Details planning procedures for TomoTherapy static and dynamic modes.
Details planning procedures for Dynamic 5 Channel mode.
Describes the structure and data labels for files exported from Static 5 Channel mode.
Describes the structure and data labels for files exported from TomoTherapy Static Plans.
Describes the structure and data labels for files exported from TomoTherapy Dynamic Plans.
Describes the structure and data labels for files exported from Dynamic 5 Channel mode.
Explains the structure of exported files for Physics Mode measurements.
Lists common problems and their potential causes and solutions.
Provides answers to common user questions about the product.
To Next Page
