To Next Page

To Previous Page

QA BEAMCHECKER™ PLUS 53

Take Advantage of the Synchronize Function

A synchronization operation can be useful if using the QA BeamChecker Plus with more than

one database. If using one QA BeamChecker Plus in any situation where more than the

allowed 9 treatment rooms are required, multiple databases can be created, each with their

own 9 treatment rooms. Additionally, one database could contain a test configuration, and

another could contain “official” measurement data. Simply perform measurements with one

database, download the data, and synchronize to another database to switch between

multiple files.

11 Using Other Accessories

11.1 Bluetooth Adapter Kit

The Bluetooth Adapter Kit (REF 70504) allows QA BeamChecker Plus wireless communication

for operations that typically require a cable connection to the PC such as baseline, Real-Time

Operation and Physics mode measurements.

Each kit includes two adapters, one with a male interface and with a female interface. Each

adapter must be supplied with a power source. The QA BeamChecker Plus internal battery

provides power through the serial port to the male interface adapter, so no external power

adapter is required. However, the female interface adapter connected to the PC or cradle

requires power via an included external adapter. See image for an illustration of a typical

configurations.

Using the Bluetooth Adapter Kit

1. If already using the QA BeamChecker Plus Data/Communication Cradle in the vault with a

cable attached from the PC, skip this step. If not, run a 9-pin serial cable from the PC into the

treatment vault.

2. If using the cradle as stated in step 1, connect the male Bluetooth interface adapter to the

Serial Pass Through port on the cradle. If not using the cradle, connect the male Bluetooth

interface adapter directly to a cable run from the PC.

NOTE: The Bluetooth Adapter Kit will not communicate through the treatment vault wall, but

because their signal is transmitted via RF, the cradle (with attached adapter) can be placed

inside a cabinet or closet and still communicate effectively.

3. Connect the included power adapter from the male Bluetooth interface adapter to an

available power outlet.

Standard Imaging QA BEAMCHECKER PLUS User Manual

Questions and Answers: