QA BEAMCHECKER™ PLUS 22
Figure 3: QA BeamChecker Plus connected to PC via serial cable
shown using two methods: with and without cradle pass through
NOTE: A Bluetooth Adapter Kit (REF 70504) is an available option allowing
wireless communication from the PC to the QA BeamChecker Plus in place
of a wired serial connection. See page 53 for more details.
6.2 Step 1: Hardware Setup
Select the appropriate section below based on application: Static 5 Channel (traditional linear
accelerator photon/electron measurements), Dynamic 5 Channel (IMAT, VMAT, or dynamic
wedge measurements) or TomoTherapy System (static or dynamic exposure).
To Next Page
Loading...