Steca Tarom 4545 - Alarm; Timer 1

51
DE
Operation
‘Main menu’
 ‘Output settings’  <Output>  ‘Select function’
‘Main menu’
 ‘Output settings’  <Output>  ‘Function settings’  ‘Generator manager’
 ‘Starting threshold’  ‘Hysteresis’
14.3.7 Alarm
The alarm switches the ‘AUX 1’ and ‘AUX 2’ on as long as one of the selected event messages is
present.
Operation
‘Main menu’
 ‘Output settings’  <Output>  ‘Select function’
‘Main menu’
 ‘Output settings’  <Output>  ‘Function settings’  ‘Alarm’
14.3.8 Timer 1 ... 4
The timers can be used to switch the outputs on and off at specific times in a weekly cycle. The
switch-on and switch-off times for each weekday can be separately defined for each timer.
Switching behaviour
The weekdays for the on and off switching times are set independently; which means that the dura-
tion of an on or off time can stretch over several days.
Operation
‘Main menu’
 ‘Output settings’  <Output>  ‘Select function’
‘Main menu’
 ‘Output settings’  <Output>  ‘Function settings’  ‘Timer 1 – 4’