Steca Tarom 4545 - TIMECHG Data File

77
DE
Information/column Value
StateLoad Switching state of load output
Off; On
StateAux1 Switching state of AUX 1 relay
Off; On
StateAux2 Switching state of AUX 2 relay
Off; On
Ah_in_24h_M[Ah] Ah meter of the energy introduced by the device 00:00 to 23:59.
Ah_in_total_M[Ah] Ah meter of the energy introduced by the device since initial com-
missioning.
Ah_in_24h_SYS[Ah] Ah meter of the energy input members total during the period from
00:00 to 23:59.
Ah_in_total_SYS[Ah] Ah meter of the energy input members total since initial commissi-
oning.
Ah_out_24h_SYS[Ah] Ah meter of the energy output members total during the period
from 00:00 to 23:59.
Ah_out_total_SYS[Ah] Ah meter of the energy output members total since initial commis-
sioning.
Ah_Load_24h_M[Ah] Ah meter of the energy discharged on the load output 00:00 to
23:59.
Ah_Load_total_M[Ah] Ah meter of the energy discharged on the load output since initial
commissioning.
BatTemp[°C] Q Value of the external battery temperature sensor, if connected.
Q ‘-’ if no value is present.
Ophours[h] Number of operating hours since initial commissioning of the
device.
18.4.2 TIMECHG data file
If the date and time settings are changed on the device, this has an impact on data recording.
Changes to the date and time settings are recorded in a special data file in order to document these
changes.
Changes are only documented in the TIMECHG.CSV data file when the SD card data logging is
activated.
Contents of TIMECHG.CSV
Date before
the change
Time before the
change
-> Date after the
change
Time after the
change
DD/MM/YYYY hh:mm:ss DD/MM/YYYY hh:mm:ss