STEP ET Series - 7.11.3 Group P93 Operation Record Parameters; 7.11.4 P94 Group Fault Processing

Chapter 7 Parameter Explanation
Shanghai Sigriner STEP Electric Co., Ltd.
- 136 -
Function
settings
Meaning
Function
settings
Meaning
57
PID reference value
58
PID feedback value
63
Encoder speed (Hz)
7.11.3 Group P93 Operation record parameters
Function code
Name
Setting range
Factory setting
P93.00
Accumulated power on time (h)
0.000~65.535
0.000
P93.01
Accumulated running time (h)
0.000~65.535
0
P93.02
Set total power-on time (days)
0~30000
0
P93.03
Remaining power-on time
(days)
0~30000
0
P93.04
The highest value of heat sink
temperature (degree)
0.000~6553.5
0.0
The inverter can automatically record the following information: the accumulated power on time of
this machine, the accumulated running time of this machine, and the maximum radiator temperature.
Function code
Name
Setting range
Factory setting
P93.05
Cumulative output power (kWh)
0.0~6553.5
0.0
The cumulative sum of the power output per unit time of the inverter from the start of operation after
power-on, in kWh.
Function code
Name
Setting range
Factory setting
P93.06
Inverter output power (MWh)
0~65535
0
The cumulative sum of the power output per unit time of the inverter from the start of operation after
power-on, in MWh.
Function code
Name
Setting range
Factory setting
P93.07
Cumulative fan running time (h)
0~65535
0
It is the inverter fan running time, and the unit is h.
Function code
Name
Setting range
Factory setting
P93.08
Record maximum current (A)
/
0
P93.09
Record maximum power (KW)
/
0
7.11.4 P94 group Fault processing
Function code
Name
Setting range
Factory setting
P94.00
Minor fault processing
0~3
1
P94.01
Automatic reset time of fault (s)
0.0~65535.5
10.0
P94.02
Automatic reset times of fault
0~65535
0
P94.00 sets the fault handling mode: