STEP ET Series - 7.11.6 P96 Group Inverter Information

Chapter 7 Parameter Explanation
ET/EP/EH Series Intelligent Flexible Driver Manual
- 139 -
Function code
Name
Setting range
Factory setting
P95.02
Version number
6.04
P95.03
Drive board software version
2.0
The P95 group mainly displays the software and hardware version parameters of the inverter, which
are generally set directly by the manufacturer.
7.11.6 P96 group Inverter information
Function code
Name
Setting range
Factory setting
P96.00
Rated power of inverter (kW)
0.0~999.9
/
P96.01
Rated current of inverter (A)
0.0~999.9
/
P96.02
Inverter light load current (A)
0.0~999.9
/
P96.03
Rated voltage of inverter (V)
0~460
/
P96.04
Inverter power coefficient (%)
0~99
/
P96.05
Current sensor current (A)
0~9999
/
P96.06
IGBT module (A)
0~9999
/
P96.07
Braking IGBT (A)
0~9999
/
P96.08
Three-phase current balance
coefficient (%)
0.800~1.200
1.000
P96.09
Rated current (480 V)
Per power
/
P96.10
Light load current (480 V)
Per power
/
The P96 group mainly displays the fixed parameters of the inverter, which are generally set directly
by the manufacturer.
P96.00~P96.04, being initially set by the manufacturer;
P96.05~P96.08 are parameter settings of the inverter itself, which are determined by the hardware
and read-only.
P96.09 - P96.10 are the current derating under 480 V level input voltage working conditions.
Function code
Name
Setting range
Factory setting
P96.20
Inverter model
0~2
0
Setting to 0 indicates light load (standard), 1 indicates heavy load (standard), and 2 indicates light
load (ES).