Chapter 4 Wiring of Inverter
Shanghai Sigriner STEP Electric Co., Ltd.
- 52 -
5: Total output power
6: Output active power
7: Speed (unsigned)
8: Speed setting (signed)
9: Speed feedback (signed)
10: Acceleration rate
11: Heat sink temperature
12: Analog quantity A0
13: Analog quantity A1
14: Analog quantity A2
15: ModBus analog output 0
16: ModBus analog output 1
For detailed description, please refer to Chapter 7 "7.6.4 Analog output parameters".
4.5.6 Other notes on wiring
The wire of the control terminal must be far away from the power line of the main circuit, otherwise,
it may cause misoperation due to electromagnetic interference.
To Next Page
Loading...