Stiegelmeyer Libra - Connecting a Reading Lamp at a Later Date (Optional)

Instruction Manual for Libra Care Bed
Page 100
6.5.3 Connecting a reading lamp at a later date (optional)
The reading lamp is mounted as follows and then connected to an external 230-volt
socket using the plug-in power supply provided.
Please read and observe the separate instruction manual enclosed.
Insert the upright column of the reading lamp (with the adapter and connection cable)
from above securely into the patient lifting pole sleeve (left or right side).
Note: The reading light can optionally be connected directly to the control unit as
follows: