Stiegelmeyer Libra - User Maintenance Checks

Instruction Manual for Libra Care Bed
Page 89
6.1 BY THE USER
If any damage or a malfunction is suspected, the bed must be
withdrawn from use immediately and disconnected from the
mains electricity supply until the defective parts have been
repaired or replaced!
Contact the operator responsible if defective parts need to be
replaced or repaired.
Besides the regular comprehensive inspections by qualified technical staff, the user
(care staff, caregiving relatives etc.) must also carry out a minimum of visual
inspections and functional checks at short, regular intervals and before use by a new
occupant.
Recommendation: Inspect all electrical and mechanical components once a month.
In addition to the above, check the switch mode power supply, power cable and
handset cable every time they have been subjected to mechanical stress and each
time after the bed has been moved to a new location.
Checklist: Inspection by the user
Check
What? How?
O
K
Not
OK
Description of
defect
Visual inspection of the electrical components
Handset, handset cable
Damage, routing of cable
Switch mode power supply
Damage, routing of cable
Handset
Damage, foil
Visual inspection of the mechanical components
Patient lifting pole, adapter
sleeves
Damage, deformation
Bed frame
Damage, deformation
Wooden surround
Damage, splinters
Mattress base frame
Damage, deformation
Safety side bars
Damage, splinters
Functional check of the electrical components
Handset
Function test, locking function
Functional check of the mechanical components
Castors
Braking, moving
Emergency release of the
backrest
Test according to instruction manual
Screws and bolts
Fixed securely
Safety sides
Safe locking, unlocking
Lower leg rest
Engages properly
Motor bolt
Fixed securely
Accessories (e.g. patient
lifting pole, grab handle)
Fastening, damage
Inspector’s signature:
Inspection result:
Date: