Instruction Manual for Libra Care Bed
Page 40
4.4.6 Handset holder (optional)
This bed can be equipped with a handset
holder which is simply clipped onto the
upper bars of the split safety sides (Vario
Safe system) in a place that is convenient
to reach from inside the bed. By stowing it
safely in the holder, the handset is always
close at hand.
Please avoid repeatedly sliding the holder along the bar or clipping it on and
off at frequent intervals. This will protect the surface of the bar from
developing visible signs of wear over time.
4.4.7 Linen holder *
The bed can be fitted with an
optional linen holder 1 , which can be
pulled out from under the footboard
whenever necessary.
To prevent the bedding from falling,
the linen holder has a gallery rail 2
which can be folded up.
Risk of injury due to trapped fingers.
• When sliding the linen holder back under the mattress base, watch your
fingers!
The maximum load-bearing capacity of the linen holder is 15 kg.
• Do not lean on the linen holder!
• Do not sit on the linen holder!
• Pay attention to the limited clearance under the linen holder when the
mattress base tilts into a full reverse-Trendelenburg position and the bed
extension* is also installed.
To Next Page
Loading...